www.weilite.com
Products List
Gasket Material
WLT-001 Reinforced Graphite
Sheet
WLT-002 Reinforced Non-asbestos
Sheet
WLT-003 Reinforced Asbestos
Sheet
WLT-004 Asbestos Rubber
Sheet
WLT-005 Non-asbestos Rubber
Sheet
WLT-006 Flexible Graphite
Sheet & Rolls
WLT-007 Flexible Graphite
Tape
WLT-008 Gasket Paper Material
WLT-009 PTFE sheet
Gasket
WLT-010 Spiral Wound Gasket
WLT-011 Reinforced Graphite
Gasket
WLT-012 Cylinder Head Gasket
WLT-013 Mould Packing Ring
Gland Packing
WLT-014 Flexible Graphite
Yarn
WLT-015 Flexible Graphite
Packing
WLT-016 Carbonized Fiber
Packing
WLT-017 Carbon Fiber Packing
WLT-018 PTFE Packing
WLT-019 PTFE Graphite Packing
WLT-020 Asbestos PTFE Packing
WLT-021 Kevlar Packing
Contact Us
Add:West Factory Area,No.669 QingShaoNianGong North Road, Economic Development Zone,Cixi City ,Zhejiang,China
Tel: 86-574-63037810
Fax: 86-574-63037820
Contact Person: Ms Hu
http://www.weilite.com
wlte@vip.sina.com
qProducts
Showroom
Gasket Material - Flexible Graphite
Tape
WLT-007
Flexible
Graphite Tape
This
tape was cutted of flexible graphite rolls,Graphite tape filler
for spiral wound gasket,
In-situ pump and valve gland packing, Manufacture of graphite
packing rings,Facing material for camprofile type gaskets,Filler
for metal jacketed type gaskets.
Also manufacture Crinkled Graphite Tape.
Length for one roll:50M;80M;100M,120M
Width:4.0MM;5.0MM;5.4MM,5.5MM;5.7MM,6.0MM8.0MM,12MM,14MM
Thickness:0.4MM;0.5MM;0.7MM,0.8MM
Test item Test result
Tolerance
of thicknss
:
±0.03mm
Tolerance
of density
:
±0.05g/cm3
Ash content
:
0.42%
Carbon content
:
99.30%
Tensile strength
:
4.5Mpa
Compressibility
:
54.73%
Resilience
rate
:
10.21%
Ignition loss
450°C
:
<= 1%
600°C
:
<= 20%
Chlorine content
:
30ppm